Limited Availability ›
This product has limited availability. Some accessories, replacement parts, or services may still be available when it is no longer available.
CM220 Right-Angle Mounting Kit

Overview

The CM220 right-angle mounting bracket can attach a sensor with a vertical pipe mount (e.g., most wind sensors) to a crossarm. It is compatible with pipes that have a 1- to 1.5-inch outer diameter. (For more information, refer to the Compatibility information.) The CM220 is creased during manufacture to allow pipes of varying diameters to seat snugly into the bracket. The 90° bend in the middle of the bracket allows the CM220 to fill roughly the same role as the 1049 or 17953 Nu-Rail Offset Crossover fitting.

Read More

Images


Detailed Description

The CM220 consists of a rectangular bracket and two 1.5 in. U-bolts.

The CM220 Right-Angle Mounting Bracket can attach a sensor with a vertical pipe mount (e.g., most wind sensors) to a CM202, CM204, or CM206 crossarm. It is compatible with pipes that have a 1.0" to 1.5" outer diameter.

The CM220 is creased during manufacture to allow pipes of varying diameters to seat snugly into the bracket. The 90° bend in the middle of the bracket allows the CM220 to fill roughly the same role as the 1049 or 17953 NU-RAIL Offset Crossover fitting.

Specifications

U-bolt and Washer Material 304 stainless steel (not passivated)
Bracket Material 12 gage, 304 stainless steel (not passivated)
Dimensions 5.74 x 5.74 x 7.62 cm (2.25 x 2.25 x 3 in.)
Weight 0.29 kg (0.65 lb)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Mounting Equipment

Compatible Note
CM202
CM204
CM206

Miscellaneous

Compatible Note
014A-L
03002-L
034B-L
05103AP-L (retired)
05103-L
05106-10 (retired)
05305-L
27106T-L
52202-L
CSAT3 (retired)
SI-111 (retired)
SR50A (retired)
WXT520 (retired)

Additional Compatibility Information

Sensors

The CM220 is compatible with sensors that have a 0.75 to 1 in. IPS (1 to 1.5 in. OD) pipe mount.

Pipe

The CM220 is compatible with user-supplied pipe that has a 0.75 to 1 in. IPS (1 to 1.5 in. OD).

Peripherals

The CM220 can be used to mount the 17992 GPS antenna and the 27084 CVF3 Mounting Stand.

Listed Under