Downloads by Name


Downloads by Category

Want instant access to downloads? Log In or Register

86SETUP Program 1.1 (1.4 MB) 29-04-2015


Used to configure or connect 86000-series anemometers sensors. learn more


A200 Sensor to PC Interface USB Drivers for the Windows operating system.  32 and 64 bit support for... learn more


A205 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows 7, Windows... learn more

AL200 ALERT & ALERT2 OS 6.0 (649 KB) 01-12-2023


Current AL200 operating system for ALERT and ALERT2. Requires the Device Configuration Utility to update the operating system... learn more

AL200 USB Drivers 2.08.28 (1.64 MB) 05-03-2013


AL200 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows 7, Windows Vista... learn more

ALERT Configuration Tool 1.1 (47.7 MB) 30-06-2016


A software utility used to configure the ALERT210.  learn more

AP200 CR1000 Program 2.01 (31.3 KB) 12-01-2021


AP200 CR1000(X) Program. Compatible with the LI-850. Note: For those with the LI-840 contact Campbell Scientific for compatible code. learn more

AVW200 OS 06 (551 KB) 10-06-2016


Current AVW200 firmware. Use the Device Configuration Utility version 1.13 or greater to send firmware and to configure... learn more

Backup and Restore Tutorial - (2.31 MB) 29-07-2008


Tutorial that demonstrates the Network Backup and Restore features of LoggerNet. learn more

BALER Patch 4.0 (3.7 MB) 08-02-2010


RETIRED PRODUCT Upgrade Baler version 2.2 or 3.4 to 4.0; no intermediate steps are required. learn more

BaroVue10 OS 1.4 (466 KB) 17-04-2023


Current OS for the BaroVue10. learn more

BaroVue10 Program Example (1 KB) 28-03-2023


Description: Includes an SDI-12 example and a RS-232-serial program example. The programs are written for a CR1000X, but... learn more

Campbell Viewpoint 2.1.0.2 (86 MB) 09-10-2019


Campbell Viewpoint is viewing software designed to accompany the Campbell Scientific optical sensor range, including the CS135 ceilometer,... learn more

CC5MPX OS 1.25.1 (13.8 MB) 24-06-2019


Current CC5MPX Camera Operating System. Note: Do not extract the firmware update file “CC5MPX_FW_1_25_1.tar.gz”.This compressed file gets sent to... learn more

CC5MPX PIC OS 2.0 (18 Kb) 18-11-2014


Current firmware for the CC5MPX Peripheral Interface Controller (PIC) Note: In order for the CC5MPX to accept the PIC... learn more

CC640 OS 1.52 (58.5 KB) 26-11-2009


Current CC640 firmware. Note:Device Configuration Utility 1.15 or newer is required for compatibility. learn more

CCFC Firmware 2.9 (23.0 MB) 29-09-2023


Latest firmware for the CCFC Field Camera. Why Update? This OS resolves an issue where the CCFC camera many... learn more

CCFC Firmware 2.7.5 () 17-09-2020


Latest firmware for the CCFC Field Camera - version 2.7.5 learn more

CD295 OS 2.07 (681 KB) 24-08-2010


Current CD295 firmware. The Device Configuration Utility is used to update the CD295 with the new firmware. learn more

CDM-A100 OS 06.03 (606 KB) 09-05-2023


Execution of this download installs the CDM-A108 / CDM-A116 Operating System on your computer which can then be uploaded to... learn more

CDM-VW300/305 OS 6 (561 KB) 21-04-2020


Execution of this download installs the CDM-VW300/305 Operating System on your computer for upload to the CDM-VW300/305 device... learn more

CDM-VW300 Example Programs (45.4 KB) 23-05-2013


CRBasic program examples for use with the CDM-VW300 and CDM-VW305. learn more


An example CR1000X program that uses the R7! SDI-12 command to retrieve data. The program adjusts the barometric... learn more

COM220 OS 05 (671 KB) 23-11-2011


Execution of this download installs the COM220 Operating System on your computer. Note: The Device Configuration Utility is used to... learn more

COM310 Examples (5 KB) 22-04-2008


CR1000 CRBasic program examples showing COM310 data callback and voice support. learn more

COM320 Firmware 4.0 (621 KB) 28-01-2010


Execution of this download installs the COM320 Operating System on your computer.   Note: The Device Configuration Utility is used... learn more

COM320 USB Driver () 01-01-2014

 
Windows USB driver for the COM320 are distributed with the Device Configuration Utililty. In the Device Configuration Utility, click... learn more


The download below is for the 09/01/15 CR1000 sample and test program example. Please contact Campbell Scientific Canada... learn more


The download below is for the 09/01/15 CR6 sample and test program example. Please contact Campbell Scientific Canada... learn more

Call
Micrometeorology Group (435) 227-9100. learn more

CPI Calculator 1.0 (2.49 MB) 06-07-2016


The CPI Calculator is a downloadable Microsoft Excel spreadsheet used to estimate the usage and capacity of a... learn more

CR1000 OS 32.07 (4.60 MB) 15-05-2024


Execution of this download installs the CR1000 Operating System and Compiler on your computer.  It also updates the... learn more


CR1000X program measures the CNR4 and controls the CNF4 heater/ventilator based on environmental conditions, and monitors the CNF4... learn more


CR1000X program that uses differential terminals to measure the four radiation outputs and one excitation terminal and one... learn more


CR1000X programs that use the MSSET and MSGET commands. learn more


CR1000X programs that read continuous data and polled data and use the SET, SETNC, and GET commands. The... learn more


CR1000X program that measures the HFP01SC, performs the self-calibration, and checks for calibration validity. Refer to the manual... learn more

CR1000X OS 8.01 (6.54 MB) 26-09-2024


This download is for the CR1000X datalogger. Execution of this download places the Operating System file(.obj) on your computer.... learn more

CR200X Series OS 04 (1.29 MB) 22-09-2015


Execution of this download installs the Operating System and Compiler on your computer for the following dataloggers:CR200X, CR206X,... learn more

CR295 GOES OS 10 (1.97 MB) 08-09-2010


Default operating system for the CR295 that supports transmission of data via GOES satellite.   Also included is the... learn more


CR3000 program measures the Pt-100 sensor for the body temperature of the CNR4. This program requires four differential... learn more

CR3000 OS 32.07 (4.39 MB) 15-05-2024


Execution of this download installs the CR3000 Operating System and Compiler on your computer.  It also updates the... learn more

CR300 QuickStart Program (569 KB) 15-03-2016


The CRBasic program referenced in the CR300 QuickStart videos and manual. learn more

CR300 Series OS 11.01 (4.96MB) 23-07-2024


This download is for the CR300 series of dataloggers including all CR300 and CR310 models. Execution of this download... learn more

CR6 OS 14.01 (8.56 MB) 26-09-2024


This download is for the CR6 datalogger. Execution of this download places the Operating System file(.obj) on your computer.... learn more

CR800 OS 32.07 (4.41 MB) 15-05-2024


Execution of this download installs the CR800 Operating System and Compiler on your computer.  It also updates the... learn more

CR9000X OS 6 (4.04 MB) 23-01-2012


Current Operating System, Compiler and CR9000X support files for the CRBasic Editor. Requires the Device Configuration Utility, LoggerNet... learn more

CRBasicEditor Patch 3.8.1 (43 MB) 13-03-2020


Campbell Scientific has an option to buy the CRBasicEditor as a stand-alone product. This patch will upgrade the stand-alone... learn more

CRVWx Firmware 4.04 (931 KB) 09-05-2023


Current version of the CRVWx firmware.  Requires the Device Configuration Utility to upload the firmware to the CRVWx. learn more

CS110 Example programs 1 (3 kB) 05-05-2020


A CS110 weather station program and a CS110 transfer standard site calibration program. The weather station program measures... learn more

CS120A & CS125 Firmware 8 (553 KB) 15-06-2016


Includes the current CS120A and CS125 firmware. Note: This is not applicable for the original CS120 sensor. learn more

CS120 Firmware 6 (1.51 MB) 10-08-2012


Includes the current CS120 firmware and the CS120 support files for the Device Configuration Utility. learn more

CS135 Firmware (408 KB) 19-03-2018


Operating System for the CS135 Ceilometer learn more

CS25 example programs 1 (5 kB) 29-01-2020


CR6, CR1000X, and CR300 programs that control the relay, measure the short circuit current for the reference and... learn more

CS26 example programs 1 (5 kB) 29-01-2020


CR6, CR1000X, and CR300 programs that control the relay, measure the short circuit current for the reference and... learn more

CS27 example programs 1 (5 kB) 29-01-2020


CR6, CR1000X, and CR300 programs that measure the short circuit current for the reference and test modules and... learn more

CS45x Firmware 4 (472 KB) 22-03-2016


Includes the current firmware for the CS451 and CS456. learn more

CS650 / CS655 Firmware 2 (429 KB) 02-12-2015


Current CS650 and CS655 firmware.  Note:  The Device Configuration Utility and A200 Sensor-to-PC Interface are required to upload the... learn more

CS725 V5C_15m (1097 KB) 14-07-2011


Current CS725 firmware learn more

CSAT3 (567 KB) 24-03-1998


PC support software for monitoring and configuring the CSAT3. learn more

CSAT3B Example Programs 1 (4 kB) 20-10-2020


Three example programs.  Simple SDM Program: SDM communications are used to collect data from a single CSAT3B. Simple CPI Program:... learn more


CR1000X datalogger programs for the CSAT3BH with SDM and CPI communications protocols.  Warning: This program is not intended for... learn more

CSAT3BH CR6 Programs 2.03 (9 KB) 20-11-2020


CR6 datalogger programs for the CSAT3BH with SDM and CPI communications protocols.  Warning: This program is not intended for... learn more

CSAT3 Binary to ASCII (33 KB) 15-02-2013


Program that converts a CSAT3 binary data set into ASCII format. Only compatible with data collected using the... learn more


Program that converts a CSAT3 binary data set into ASCII format. Only compatible with data collected using the... learn more

CSAT3B OS 3.02 (548 KB) 14-10-2019


Current CSAT3B Operating System. learn more


Example CR1000, CR3000, and CR23 datalogger programs to measure the CSAT3 three dimensional ultrasonic anemometer. The programs include... learn more


The CSAT3H Heater Controller ships with this encrypted program. This program is for the unlikely event that the... learn more


Example Visual Basic program for collecting binary CSAT3 data using a PC and RS-232 communications. learn more


Example datalogger programs for finding the optimal SDM baud rate. These programs are used to determine the appropriate... learn more

CSI Web Server Patch 1.7 (37.8 MB) 22-05-2024


Campbell Scientific has an option to buy the CSI Web Server as a stand-alone product. This patch will upgrade... learn more

CS SURVEYOR 1.01 (86 MB) 17-12-2019


CS SURVEYOR is a PC-based scientific data collection, statistical analysis, and visual display/graphing software package with an intuitive... learn more

CWB100 Firmware 1.04 (711 KB) 10-06-2013


Latest firmware for the CWB100.   learn more

CWB100 USB Driver () 01-01-2014

 
Windows USB drivers for the CWB100 are installed via the Device Configuration Utililty. In the Device Configuration Utility, click on... learn more

CWS220 Firmware 5 (442 KB) 30-03-2016


Latest firmware for the CWS220.   learn more

CWS655 Firmware 5 (433 KB) 30-03-2016


Latest firmware for the CWS655.   learn more

CWS900 Firmware 5 (448 KB) 30-03-2016


Latest firmware for the CWS900.   learn more


An introduction to data acquisition systems. learn more


Tutorial that demonstrates where to find Data Table memory allocation. This indicates how long it will take for... learn more


A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus... learn more

DVW Tool Box 1.3 (13.4 MB) 04-11-2019


DVW Tool Box is an application-specific software tool for demonstration and evaluation of the CDM-VW300, CDM-VW305 and VWire... learn more


CR1000X datalogger program for Campbell open-path eddy-covariance systems. learn more

EasyFlux DL for CR3000 1.2 (50.1 KB) 04-04-2018


CR3000 datalogger program for Campbell open-path eddy-covariance systems. learn more

EasyFlux DL for CR6CP 1.08 (132 KB) 13-06-2024


CR6 datalogger program for Campbell closed-path eddy-covariance systems. learn more

EasyFlux DL for CR6OP 2.01 (98.2 KB) 21-07-2022


CR6 datalogger program for Campbell open-path eddy-covariance systems. learn more

EasyFlux PC 1.0 (55.8 MB) 04-10-2017


EasyFlux® PC is a computer program that processes high frequency time series data, collected using a Campbell Scientific... learn more

EC100 OS 8.02 (560 KB) 14-10-2019


EC100 Operating System. Watch the Video Tutorial: Updating the EC100 Operating System. learn more

ECMon 1.6 (10.7 MB) 29-03-2016


EC100-Series Support Software. learn more

Evation V2R5 Software V2R5 (290 Mb) 06-01-2016


The EVATION® software suite is included as standard to view real-time data numerically and graphically and provides advanced... learn more

File Control Tutorial - (2.0 MB) 19-01-2009


File Control is used to manage datalogger files.  Starting and stopping a program are shown in this tutorial. ... learn more

German Language Pack 4.6 (769 KB) 13-04-2021


German language files for LoggerNet 4.6. Note: Language support is for the above listed version only. learn more


This tutorial shows how to move data into a database using LNDB. The report generation capabilities of QuickReports... learn more


View Pro is included with LoggerNet 4 and RTDAQ. This tutorial introduces some of the new features including... learn more


View Pro is included with LoggerNet 4 and RTDAQ. This tutorial introduces some of the new features including... learn more


A Granite 10 example program using CAN bus to query an ECU for the legislated PID values once... learn more

Granite 10 OS 2.01 (6.66 MB) 04-05-2021


This OS should only be updated via direct connection with the Granite 10.  This download is for the Granite... learn more

Granite 6 WiFi OS Update 5.01 (1.33 MB) 07-10-2020


Granite 6 Wi-Fi OS update. This download includes the Wi-Fi OS. learn more

Granite 9 OS 2.01 (6.33 MB) 04-05-2021


This OS should only be updated via direct connection with the Granite 9.  This download is for the Granite... learn more


Current Granite Temp 120 Operating System. Requires the Device Configuration Utility and a USB micro cable.  learn more

HS2 OS 1.08 (518 KB) 28-08-2020


Current HS2 (Hydrosense II) firmware. learn more


Hydro-Link is a browser-based user interface that can be run from a PC or directly from the datalogger. ... learn more

Hydro-Link (Zip File) 2.02.16 (66.2 MB) 14-06-2022


Hydro-Link is a browser-based user interface that can be run from a PC or directly from the datalogger.... learn more

HydroSci 1.2.1 (41.7 MB) 09-10-2017


HydroSci is used to configure and extract data from the CRS45X Recording Submersible Pressure Transducer and the OBS-3A... learn more


Adds Chinese language support for version 1.2 of HydroSci. Note: Language support for the above listed version only. learn more

HydroSoft 1.0.8 (5.16 MB) 26-07-2012


Current version of the HydroSense II Support Software. learn more


Current IPn3Gb firmware.  Read the manual for the update procedure. Note: When upgrading the IPn3G from any version... learn more

IPn3Gb Patch v2_0_0-r2000 (15 KB) 27-08-2014


When upgrading from any version of firmware stating 1.x.x, the unit should be patched with IPn3G-v2_0_0-r2000.pkg before upgrade... learn more


Windows USB drivers for the IPn3Gb modem. Note: Drivers must be installed before connecting the IPn3Gb to your computer. learn more


Spreadsheet for calculating epoxy fill needed for road sensor installation learn more

LNDB Patch 1.3 (41.8 MB) 22-12-2017


Upgrades LNDB 1.x and 1.2 to 1.3. Note: This application requires the Microsoft .Net 4.0 Framework.  If it is not... learn more

LNDB Trial 2.0 (45.7 MB) 01-04-2019


A fully functional 30 day trial version of LNDB (LoggerNet DataBase) software. Note: This application requires the Microsoft .Net... learn more

Call
Upgrades for LoggerNet Linux are available by calling Campbell Scientific. learn more

LoggerNet Patch 4.9 (419 MB) 02-10-2024


This patch will upgrade LoggerNet, LoggerNet Remote or LoggerNet Admin version 4.0 and newer to 4.9. A version... learn more

LoggerNet Patch (Large) 3.4.1 (74.2 MB) 22-10-2007


This patch upgrades LoggerNet version 3.0 and newer to 3.4.1. A version of LoggerNet 3.x must be installed... learn more

LoggerNet Remote Trial 4.9 (423 MB) 02-10-2024


This is a fully functional 30 day trial of the remote version of LoggerNet. Current LoggerNet users: It is... learn more

LoggerNet SDK Patch 4.6 (21.2 MB) 22-04-2020


This patch upgrades LoggerNet SDK 4.0 and greater to version 4.6. learn more


This patch upgrades LoggerNet Server SDK 4.0 and greater to version 4.6.  learn more

LoggerNet Trial 4.9 (423 MB) 02-10-2024


This is a fully functional 30 day trial of the standard version of LoggerNet. This is a trial... learn more

LoggerTalk 2.0 (1.2 MB) 12-05-2006


Voice modem (COM310, COM300 and VS1) voice string editor used with the following dataloggers: CR10(X), CR510 and CR23X. learn more


This CRBasic program is meant for logging the analogue output of the LAS MkII scintillometer, in this case... learn more


This CRBasic program is meant for logging the serial output of the LAS MkII scintillometer, for use on... learn more

LR4 OS 1.3 (46 KB) 13-08-2014


Current LR4 firmware. Read the manual for the update procedure. learn more

MD485 OS 05 (583 KB) 06-04-2012


Current MD485 operating system. Requires the Device Configuration Utility. learn more

MeteoPV OS 2.06 (1.36 MB) 26-03-2024


Current MeteoPV Operating System. learn more


Three CR1000X data logger programs that read the MetSens200 measurements and sensor status. An example program is included... learn more


Three CR1000X data logger programs that read the MetSens300 measurements and sensor status. An example program is included... learn more


Three CR1000X data logger programs that read the MetSENS500 measurements and sensor status. An example program is included... learn more


Three CR1000X data logger programs that read the MetSens550 measurements and sensor status. An example program is included... learn more


Three CR1000X data logger programs that read the MetSens600 measurements and sensor status. An example program is included... learn more


BulletPlus - 4G/LTE Ethernet/Serial/USB Gateway w/WIFI OS 1.3 learn more

NL100 Firmware 10 (770 KB) 23-11-2011


Current NL100 firmware. Requires the Device Configuration Utility and a 9-pin female to female NULL modem cable. learn more

NL200/201 Drivers () 01-01-2014

 
Windows USB drivers for the NL200 Series are installed via the Device Configuration Utililty. In the Device Configuration Utility, click... learn more

NL200 / NL201 Firmware 10.03 (571 KB) 04-09-2018


Current NL200 / NL201 firmware. Requires the Device Configuration Utility and a USB micro cable. Note: When updating to... learn more

NL240 Drivers () 01-01-2014

 
Windows USB drivers for the NL240 are installed via the Device Configuration Utililty. In the Device Configuration Utility, click on... learn more

NL240 Firmware 10.03 (671 KB) 04-09-2018


Current NL240 firmware. Requires the Device Configuration Utility and a USB micro cable.  Note: When updating to OS 10.03... learn more

OBS500 Firmware 03 (441 KB) 24-04-2017


Latest firmware for the OBS500. learn more

OBS-5+ Utility 5.50 (11.3 MB) 23-04-2010


Utility for the OBS-5+ sensor. learn more

PC295 2.0.0.1 (1.91 MB) 16-12-2010


CD295 program generator. learn more

PC400 4.8 (186 MB) 14-08-2024


PC400 is Campbell Scientific's free entry-level data logger support software. This versatile software supports a variety of telecommunication... learn more

PC9000 Patch 5.3.1 (21.9 MB) 02-03-2007


RETIRED PRODUCT Upgrade PC9000 version 5.0, 5.1, 5.2 or 5.3 to 5.3.1; no intermediate steps are required. PC9000 5.0, 5.1,... learn more


New version of PConfig 1.9.1 available for Sentek's EasyAG and Enviroscan probes. learn more

PCONNECTCE Patch 2.33 (1.65 MB) 22-05-2008


RETIRED PRODUCT Upgrade PConnectCE 2.0, 2.1 or 2.2 to 2.33. PConnectCE 2.0, 2.1 or 2.2 must be installed on your... learn more

PCONNECT Patch 3.4 (1.5 MB) 22-12-2009


RETIRED PRODUCT Upgrade PConnect 3.0 thru 3.3 to version 3.4. PConnect 3.0 or newer must be installed on your... learn more

PC-OPC Demo 2.1 (1.1 MB) 28-09-2006


Current demo version of our PC-OPC software learn more

PC-TDR 3.0 (7.34 MB) 15-12-2016


Support software designed for the TDR200 and is also compatible with the retired TDR100 Time-Domain Reflectometer. learn more

Power Budget Spreadsheet 1.03 (1.00 MB) 12-03-2019


This is a Microsoft Excel spreadsheet used to estimate a power budget for Campbell Scientific systems. Power Budget Spreadsheet... learn more


This program (PConfig.exe) is supplied by Sentek Pty Ltd, to allow the configuring of Sentek EnviroSCAN, Drill &... learn more

PVS5120 Sample Programs (5.79 KB) 08-10-2014


Example CR1000 programs for triggering a PVS5120 that has been configured to run on SDI12 commands, PakBus commands... learn more

PWS100 OS 7 (517 KB) 30-11-2015


Current PWS100 operating system.   learn more


Designed to complement the PWS100 the Present Weather Viewer provides a simple yet comprehensive interface showcasing many of... learn more


An example CR1000X program uses the M! SDI-12 command to measure the RainVue 10 or RainVue 20 and... learn more


CR800, CR1000 with Airlink Raven (CDMA Only) learn more


CR10X, CR510, CR23X with Airlink Raven (CDMA Only) learn more


CR800, CR1000 with Airlink Raven learn more


CR10X, CR510, CR23X with Airlink Raven learn more


Raven X-HSPA Bell Template – Airlink Raven X-HSPA Public Dynamic IP Template for the Bell network (115200 baud) learn more

Raven X-HSPA Rogers Template (4.91 KB) 11-04-2013


Raven X-HSPA Rogers Template – Airlink Raven X-HSPA Dynamic IP Template for the Rogers network (115200 baud) learn more

Raven X-HSPA Telus Template (4.62 KB) 10-12-2012


Raven X-HSPA Telus Template – Airlink Raven X-HSPA Public Static IP Template for the Telus network (115200 baud) learn more


Airlink Raven XT CDMA Telus Template (115200 baud) learn more


Airlink Raven XT CDMA Telus Template (PPP) learn more


CR800, CR1000 with Airlink Raven learn more


CR10X, CR510, CR23X with Airlink Raven learn more


CR800, CR1000 with Airlink Raven learn more


CR10X, CR510, CR23X with Airlink Raven learn more


This driver is for the SBT-USC6K USB to Serial cable (CSI Part# 17394 - Silver Cable). Support is... learn more

RF400 Series OS 10 (612 KB) 28-03-2005


Current RF400, RF410, RF415 firmware. Requires the Device Configuration Utility. learn more

RF401A Series OS 05 (438 KB) 22-07-2015


Current RF401A and RF411A firmware. Requires the Device Configuration Utility. learn more

RF401 Series OS 04 (646 KB) 14-08-2008


Current RF401, RF411, RF416 firmware. Requires the Device Configuration Utility. learn more

RF430 Series OS 02 (702 KB) 30-08-2011


Current RF430, RF431, RF432 firmware. Requires the Device Configuration Utility. learn more

RF430 USB Drivers 2.12.36.4 (1.64 MB) 28-10-2021


RF430 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 7 to Windows 10. Note:... learn more

RF430 USB Drivers 2.08.28 (1.64 MB) 05-03-2013


RF430 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows 7, Windows... learn more

RF500M DIAL OS 01 (714 KB) 27-02-2012


Execution of this download copies the Dial Operating System (-DA) forthe RF500M onto your computer. The dial OS... learn more

RF500M OS 04 (492 KB) 04-02-2016


Execution of this download copies the PakBus Operating System (-PB) for the RF500M onto your computer. The -PB... learn more


Example CR1000 datalogger programs to measure a RMY81000 configured as a RMY81005 or RMY81005A. Along with the programs... learn more

RTDAQ Patch 1.4.1 (208 MB) 13-03-2020


This patch will upgrade RTDAQ version 1.0, 1.1, 1.2, 1.3 or 1.4 to 1.4.1. RTDAQ 1.x must be... learn more

RTDAQ Trial 1.4.1 (217 MB) 13-03-2020


A fully functional 30 day Trial Version of RTDAQ - Real Time datalogger support software for High Speed... learn more

RTMC Pro Patch 4.3.3a (87.7 MB) 22-05-2024


This patch upgrades RTMC Pro 4.0 and newer to 4.3.3a. Note: This application requires the Microsoft .Net 4.0 Framework.... learn more

RTMC Pro Patch 5.0.1 (60.1 MB) 22-05-2024


This patch upgrades RTMC Pro 5.0 to 5.0.1. Note: This application requires the Microsoft .Net 4.0 Framework.  If it... learn more

RTMC Pro Trial 5.0.1 (85.7 MB) 22-05-2024


A fully functional 30 day trial version of RTMC Pro (Real Time Monitoring & Control) software for creating... learn more

RTMC Run-time Patch 5.0.1 (23.0 MB) 22-05-2024


For use with RTMC 5.0 or greater projects only. Projects built with RTMC 4.3.3 or older may not display... learn more

RTMC Run-time Patch 4.3.3 (50.6 MB) 13-03-2020


This patch is intended for the stand alone RTMC Run-time product and will NOT upgrade RTMC Run-time included... learn more

RTMC Web Server Patch 3.2 (26.6 MB) 22-09-2010


RETIRED PRODUCT This patch is for use ONLY if you have LoggerNet 4.0 or RTMC Pro 3.0 or newer. ... learn more

RV50(X) Template Files (414 KB) 25-01-2021


For use with the Sierra Wireless RV50(X) modem. These template files are used with the Sierra Wireless ACEManager to configure the... learn more

Sat Commander 11.3.8 (3.78 MB) 08-03-2011


TX312 Support Software. learn more

SAT HDR GOES 3.2.4 (505 KB) 01-02-2005


HDR GOES Support software and Operating System. SAT HDR GOES update for 2004 leap year and reset issues.... learn more

SC105 OS 04 (573 KB) 28-08-2007


Current SC105 firmware. Requires the Device Configuration Utility and a 9-pin socket (female) to socket (female) NULL modem... learn more

SC115 Drivers () 01-01-2014

 
Windows USB drivers for the SC115 are installed via the Device Configuration Utililty.  In the Device Configuration Utility, click... learn more

SC115 OS 05 (429 KB) 17-09-2021


Current version of the SC115 Operating System.  Requires the Device Configuration Utility to upload the operating system to... learn more

SC-CPI OS 04 (477 KB) 10-10-2016


Execution of this download installs the SC-CPI Operating System on your computer for upload to the SC-CPI device... learn more

SC-USB Drivers 2.10.00 (6.37 MB) 21-05-2014


The SC-USB's Software drivers for use with Windows Operating Systems. learn more

SC-USB Firmware 03 (8 KB) 25-09-2009


Current version of the SC-USB firmware. The SC-USB utility is used to update the firmware in the SC-USB. learn more

SDM-CAN Helper 1.1 (59.5 MB) 29-09-2016


Add-on package for RTDAQ. Assists users of the SDM-CAN device.See the SDM-CAN Helper Overview for more information about this... learn more

SDM-CAN OS 4 (612 KB) 21-11-2006


Current version of the SDM-CAN firmware. learn more


CRBasic program demonstrating twelve functions of the SDM-IO16A using the SDMIO16() instruction. This program is not an example... learn more

SDMS40 Example Programs 1 (4 KB) 13-08-2020


Three example CR1000X programs. Two programs use SDI-12 and one program uses RS-232. All example programs read the... learn more

SDMS40 Firmware Update 7.4e (864 KB) 26-06-2020


Latest firmware and utilities for the SDMS40. learn more

SDM-SIO1 6 (668 KB) 03-10-2013


Current firmware for the SDM-SIO1. Note: If your version of DevConfig does not support the download of *.hex files, you... learn more

Short Cut 4.6 (32.6 MB) 02-10-2024


Short Cut creates simple programs for our CR200-series, CR300-series, CR510, CR500, CR10(X), 21X, CR23X, CR6, CR800, CR1000(X), CR1000Xe,... learn more

SkyVue-8-CS136-OS 2 (460kb) 11-12-2019


Introduction Campbell Scientific has introduced a new operating system, OS2 for the SkyVue 8 ceilometer. It is fully backwards... learn more

SkyVue Example Programs 1 (3 KB) 07-11-2019


CRBasic data logger programs for use with CS message 1. One example includes a cyclic redundancy check (CRC).Please... learn more

SMS 4.10 (6.73 MB) 06-08-2007


SMS (Storage Module Software) is a utility used to configure and retrieve data from Campbell Scientific storage modules. ... learn more

SnowVue 10 OS 1.19 (472 KB) 08-02-2024


Current SnowVue 10 operating system.  Note: OS update must be performed using the aXLOADOS! SDI-12 command. Please refer to the... learn more


Two programs that read the SnowVue 10 sensor. One program performs temperature compensation to provide snow depth. The... learn more


Tutorial to help you decide which of our software packages will best meet your needs. learn more


Tutorial to help you decide which of our software packages will best meet your needs. learn more

SR50A/AT OS 1.3 (52 KB) 22-08-2007


Current SR50A / AT firmware. learn more

SR50A example programs 1 (11 kB) 22-01-2020


CR6 and CR1000X programs that directly read each type of SR50A output (SDI-12, RS-232, RS-485), and a CR1000... learn more


CR6 and CR1000X programs that read the SR50AH SDI-12 output and control the SR50AH heater. A 107 sensor... learn more

SR50AT example programs 1 (11 kB) 22-01-2020


CR6 and CR1000X programs that directly read each type of SR50AT output (SDI-12, RS-232, RS-485), and a CR1000... learn more


CR6 and CR1000X programs that read the SR50ATH SDI-12 output and control the SR50ATH heater. The programs use... learn more

Tasks Tutorial - (2.45 MB) 29-07-2008


Tutorial that demonstrates the use of the Task Master in Loggernet for automating tasks. learn more

TDR100 OS 0.9724 (60 KB) 15-08-2012


Current TDR100 Operating System. PC-TDR must be connected to TDR100. learn more


TX320 & TX321 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows... learn more

TX321 / TX320 GPS Update 4 (1.09 MB) 18-12-2019


This download is a zip file that contains new firmware v11.11 and v10.23 for the G6 radio internal... learn more


CR3000, CR1000, or CR800-series data logger program for the TX325 that sets up self-timed and random transmissions and... learn more


GRANITE-series, CR6, CR1000X, or CR300-series data logger program for the TX326 and TX325 that sets up self-timed and... learn more


This download consists of an executable file which, when run, will install the drivers needed to use Sentek... learn more


This driver is for the CB-FTDI USB to Serial cable (Part# L17394 - Black Cable). Support is for... learn more


This driver is for the CB-FTDI USB to Serial cable (CSI Part# 17394 - Black Cable). Support is... learn more

VisualWeather Patch 3.1.3 (45.7 MB) 03-08-2012


Upgrade Visual Weather version 3.x to 3.1.3. This patch requires that version 3.x exists on the computer. learn more

VisualWeather Patch 2.3 (26.3 MB) 19-12-2008


Upgrade Visual Weather version 2.0, 2.1 or 2.2 to 2.3. This patch requires that version 2.0, 2.1 or... learn more

VisualWeather Trial 3.1.3 (56.1 MB) 03-08-2012


A fully functional 30 day trial version of VisualWeather.  VisualWeather is for those who want reliable, real-time weather... learn more

Volt100 OS 06.03 (640 KB) 09-05-2023


Execution of this download installs the Volt108 / Volt116 Operating System on your computer which can then be uploaded to... learn more

VSC100 OS 7.0 (478 KB) 07-07-2015


VSC100 Operating System. learn more

VSC100 USB Drivers 2.08.28 (1.64 MB) 05-03-2013


VSC100 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows 7, Windows... learn more


The operating system file (.obj extension) can be downloaded and saved to a VWA with the USB cable.... learn more

VWire 305 OS 6 (602 KB) 21-04-2020


Execution of this download installs the VWire 305 Operating System on your computer for upload to the VWire... learn more


Program to read 20 Hz dynamic data from two VWire 305 analyzers measuring eight channels each. learn more

VwProjects 1.2 (11.0 MB) 23-11-2021


VwProjects is a free software download. The software allows a PC to create files called a project file... learn more


LoggerNet 4.0 was released in August of 2009. This tutorial demonstrates some of the new features and enhancements.... learn more


LoggerNet 4.0 was released in August of 2009. This tutorial demonstrates some of the new features and enhancements.... learn more


Two example CR1000X programs that read the WindSonic1. One program reads the sensor directly, and the other program... learn more


An example CR800-series program and a CR200(X)-series program that read the WindSonic4. Both programs filter out data when... learn more


An example program to read and store Wintersense SDI-12 data every five minutes. Program uses 0 for the... learn more

Wireless Sensor Planner 1.7 (30.5 MB) 08-08-2013


The Wireless Sensor Planner is a tool for use with Campbell Scientific wireless sensors.  It assists in designing... learn more

CR10X OS 1.23 (1.45 MB) 02-04-2010


Execution of this download installs the CR10X Operating System (Mixed-Array) on your computer.   Note: The Device Configuration Utility is... learn more

CR10X-PB OS 1.10 (647 KB) 28-03-2006


Execution of this download installs the CR10X PakBus Operating System on your computer.   Note: The Device Configuration Utility is... learn more

CR10X-TD OS 1.15 (645 KB) 28-03-2006


Execution of this download installs the CR10X Table Data Operating System on your computer.   Note: The Device Configuration Utility is... learn more

CR200 Default OS 10 (1.97 MB) 08-09-2010


Default operating system loaded into the datalogger at the factory.  Also included is the Compiler and CRBasic Editor... learn more

CR200 MODBUS OS 10 (1.97 MB) 08-09-2010


Special operating system that supports ModBus communication and SDI-12 sensors .  Also included is the Compiler and CRBasic... learn more

CR200 Serial Input OS 10 (1.97 MB) 08-09-2010


Special operating system that supports serial sensors, SDI-12 sensors, and sending data to another PakBus device.  Also included... learn more

CR23X OS 1.19 (690 KB) 28-03-2006


Execution of this download installs the CR23X Operating System (Mixed-Array) on your computer. Note: The Device Configuration Utility is... learn more

CR23X-PB OS 1.10 (706 KB) 28-03-2006


Execution of this download installs the CR23X PakBus Operating System on your computer. Note: The Device Configuration Utility is... learn more

CR23X-TD OS 1.15 (703 KB) 28-03-2006


Execution of this download installs the CR23X Table Data Operating System on your computer. Note: The Device Configuration Utility... learn more

CR5000 OS 7 (3.0 MB) 26-02-2014


Current Operating System, Compiler and CR5000 support files for the CRBasic Editor. Requires the Device Configuration Utility, LoggerNet... learn more

CR510 OS 1.15 (640 KB) 28-03-2006


Execution of this download installs the CR510 Operating System (Mixed-Array) on your computer. Note: The Device Configuration Utility is... learn more

CR510-PB OS 1.10 (647 KB) 28-03-2006


Execution of this download installs the CR510 PakBus Operating System on your computer. Note: The Device Configuration Utility is... learn more

CR510-TD OS 1.16 (645 KB) 28-03-2006


Execution of this download installs the CR510 Table Data Operating System on your computer. Note: The Device Configuration Utility... learn more

PC208W Patch 3.3 (4.5 MB) 11-04-2001


Upgrade PC208W versions 3.0-3.2a to the latest 3.x revision; no intermediate steps are required. PC208W 3.0 or greater... learn more