Current Version: 4.5
PC200W is a free starter software package designed for first-time users or users with simple data communication needs; it provides basic tools (clock set, program download, monitor data, retrieve data, etc.). PC200W supports direct connections between a PC and data logger (no telecommunications or scheduled data-collection support).
After a program is created with our Short Cut Program Generator (included), PC200W is typically used to download the program to the data logger.Read More
|Operating System||Windows 10, 8, or 7|
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Recommended computer operating systems—Windows 7, 8, or 10
Only direct connection between the PC and data logger is supported (telecommunications are not supported and neither is scheduled data collection).
Our starter software that supports direct connection between a datalogger and a computer. Short Cut, Device Configuration Utility and CardConvert are included.
Note: More recent versions of Short Cut and Device Configuration Utility have been released and are available as individual downloads.
Supported Operating Systems: (32 and 64 bit) Windows 10, 8.1, 8 or 7.
Short Cut creates simple programs for our CR200-series, CR300-series, CR510, CR500, CR10(X), 21X, CR23X, CR6, CR800, CR1000(X), CR3000, CR5000 and CR9000X dataloggers. Both mixed array and table data operating systems are supported. Short Cut also supports our ET106, ET107 and MetData1 weather stations. The newest version includes the latest sensor files.
A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus Graph and the Network Planner if they have been installed previously by another Campbell Scientific software package.
Supported Operating Systems:
Windows 10, 8.1, 8, and 7 (Both 32 and 64 bit)
Number of FAQs related to PC200W: 32
Expand AllCollapse All
Units cannot be displayed in the Monitor Data tab of PC200W. When data is collected using PC200W, the units, if known, are contained in the header of the data file. They can be displayed in View by selecting the View | Show Full Header menu item.
The latest version of PC200W can be downloaded free-of-charge from the Downloads area of the PC200W product page.
After a multiplexer has been added in Short Cut (SCWin), all the sensors that can be added to the multiplexer are listed in the Available Sensors and Devices tree. Short Cut only allows two different sensors to be added to a multiplexer if they are both measured using the same type of measurement (that is, single-ended, differential, half bridge, 3-wire half bridge, etc.). After a sensor is added to the multiplexer, the Available Sensors and Devices tree lists only those sensors that require the same type of measurement as the first sensor added.
A control port must first be configured for output in the data logger program before it can be toggled on or off. Consequently, if a selected port doesn’t appear to change, the program may not have the port configured for output. (Refer to the operator’s manual for the data logger for more information.)
The retired CR500 and CR510 have two control ports; however, only one of the ports, control port 1, can be configured for output. Therefore, control port 2 cannot be toggled on or off. It is included on the display so that its status can be monitored.
Data records are collected (downloaded from the data logger to the PC) from the PC200W Collect Data tab. The records can be viewed and printed by selecting View from the PC200W toolbar or the Tools menu.
The Device Configuration Utility is included with PC200W. It is also available free-of-charge as a stand-alone product on the Downloads page of our website.
Yes. To clear data tables, follow these steps: