The LR4 relay module is useful in situations where the power is unreliable or where power needs to be conserved, because it does not need electricity to keep the relay closed. The state of the relay can only be changed by sending a command to the LR4 or by manually toggling the relay button.Read More
|Supply Voltage||9 to 30 Vdc|
|Operating Temperature Range||-40° to +60°C|
|Maximum Voltage Ratings of Relays||30 Vdc/30 Vac|
|Dimensions||17.0 x 3.7 x 6.1 cm (6.7 x 1.5 x 2.4 in.)|
|Weight||0.48 kg (1.05 lb)|
|Quiescent||< 2.0 mA|
|Peak||< 250 mA|
|Hardware||SDI-12, RS-232, RS-485|
|Protocol||SDI-12 Version 1.3, or ModBus via RS-232/RS-485 at 19,200 bps|
Digital I/O Input Voltage
|Relay #1, Relay #2||Two independent; single pole single throw (SPST)|
|Relay #3, Relay #4||Two independent; single pole double throw (SPDT)|
|Relay #1, Relay #2||Not to exceed 100 VA or 5 A|
|Relay #3, Relay #4||Not to exceed 60 VA or 2 A|
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Number of FAQs related to LR4: 1
The following relay devices can be used with the CR800 and the CR850:
The CR800 and the CR850 can also be used with a wide variety of third-party relay devices.
*Because the CR800 and the CR850 only have four digital ports, they do not have the ability to switch all six of the relays on the A6REL-12.