Note: The SEN12512 is only available in a limited supply and will be discontinued after the supply is exhausted.
The SEN12512 is an EasyAG probe with an SDI-12 interface and a 50-cm length. This probe provides water content profiles for cultivated soils of good tilth—commonly found in vegetable production areas. For stony soils where the average stone size is greater than 10 mm, use the EnviroSCAN probe.Read More
|Sensor Measuring Principle||High-frequency capacitance|
|Output||SDI-12 version 1.2|
|Interface Measuring Principle||16 bit pulse count|
|Output Resolution||16 bit|
|Water Content Reading Range||0 to ~65%|
|Temperature Effects||±3% (5° to 35°C)|
|Time to Read 1 Sensor||1.1 s|
|Sphere of Influence||99% of the reading is taken within a 10 cm radius from the outside of the access tube.|
|Sensors per Standard Probe||5|
|Operating Temperature Range||0° to 75°C|
|Sensor Diameter||2.65 cm (1.0 in.)|
|Access Tube Diameter||3.2 cm (1.3 in.)|
|Probe Length||50 cm (20 in.)|
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Number of FAQs related to SEN12512: 2
To protect itself, the interface will switch off when the supply voltage is above or below these operating voltages:
The Sentek website provides an FAQ list.