RETIRED ›
This product is no longer available and has been replaced by: CS100,CS106. Some accessories, replacement parts, or services may still be available.
CS115 Druck Barometric Pressure Sensor
Services Available
Repair No
Calibration No
Free Support No

Overview

The CS115 was retired effective 22 August 2006. If you are a CS115 user, and desire additional or replacement units, the product may be available on special order with a long lead time (months). Contact Campbell Scientific for details. The CS115 was a barometric pressure transducer with a measurement range of 600 to 1100 mb (below sea level—as in a mine—to approximately 12,000 feet); the overpressure limit was 1375 mb. The CS115 was manufactured by Druck, Inc. as their model RPT410F.


Images


Similar Products


Specifications

Operating Temperature -40° to +60°C
Measurement Range 600 to 1100 mb
Overpressure Limit 1375 mb
Accuracy ±0.3 mb (@ +20°C)
Dimensions 6.0 cm x 6.0 cm x 2.9 cm (2.4 x 2.4 x 1.2 in.)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Data Loggers

Compatible Note
21X (retired)
CR10 (retired)
CR1000 (retired)
CR10X (retired)
CR200X (retired)
CR206X (retired)
CR23X (retired)
CR295X (retired)
CR3000 (retired)
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR800 (retired)
CR850 (retired)
CR9000 (retired)
CR9000X (retired)

Additional Compatibility Information

Data Logger Considerations

The CR500, CR510, CR10, CR10X, CR23X use the Period Average Instruction (P27) to measure the CS115. The CR7 and 21X use the Pulse Count Instruction (P3). The CR1000, CR3000, and CR5000 uses the PeriodAvg Instruction; the CR9000(X) uses the PulseCount Instruction.

Related Documents