Overview
The 15730 is a 900 MHz, unity gain (0 dBd), 1/4 wave whip, right-angle antenna. The 15730 is an omnidirectional antenna that attaches directly to the product (no cables). It should be used inside an enclosure or building.
Note: The yellow stripe on the antenna indicates that this antenna operates with a center frequency of 916 MHz.
Read MoreImages
Similar Products
Detailed Description
The 15730 attaches directly to a 900 MHz spread-spectrum transceiver that has an RPSMA connector; an antenna cable is not needed. This unity gain, omnidirectional antenna should be used inside an enclosure or building.
Note: The yellow stripe on the antenna indicates that this antenna operates with a center frequency of 916 MHz.
Specifications
| Antenna Type | 1/4 wave whip, indoor antenna, right angle |
| Frequency Band Supported | 900 MHz (886 to 946 MHz) |
| Gain | 1.16 dBd (3.3 dbi) maximum, typically no gain without associated ground plane |
| Connector | Reverse Polarity SMA (RPSMA) socket (female) |
| Manufacturer's Model Name | LINX ANT-916-CW-RCS |
| Diameter | 9.4 mm (0.37 in.) maximum |
| Length | 53.5 mm (2.11 in.) |
| Weight | 8.2 g (0.3 oz) |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Data Loggers
| Compatible | Note | |
|---|---|---|
| CR205 (retired) | ||
| CR206 (retired) | ||
| CR206X (retired) | ||
| CR300 | Compatible with the -RF407 and -RF412 options. | |
| CR310 | Compatible with the -RF407 and -RF412 options. | |
| CR350 | Compatible with the -RF407 and -RF412 options. | |
| CR6 | Compatible with the -RF451, -RF407, and -RF412 options. | |
| CRVW3 | Compatible with the -RF451, -RF407, and -RF412 options. | |
| CRVW3-NE | Compatible with the -RF451, -RF407, and -RF412 options. |
Communication Devices
| Compatible | Note | |
|---|---|---|
| RF400 (retired) | ||
| RF401 (retired) | ||
| RF401A | ||
| RF407 | ||
| RF430 (retired) | ||
| RF451 (retired) |
Additional Compatibility Information
This antenna connects to wireless devices that have a Reverse Polarity SMA (RPSMA) connector and that operate between 900 and 930 MHz. This antenna is not suitable for use with 868 MHz or 2.4 GHz, Wi-Fi, or cellular products.
If this antenna needs to be connected to a radio or bulkhead SMA connector, a 28477 SMA plug to RPSMA jack is required.
If this antenna needs to be connected to a radio or bulkhead Type-N connector, a 18686 Type-N plug to RPSMA jack adapter is required.