Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
cr1000 compile warnings kirving 4
CR1000X and GPS16X-HVS GPS Receiver weatherguy 1
How to log a LiCor7500 on a CR1000? FCarotenuto 3
.dat file to Wuhu Makada 4
NULL character handling Kruggerand 6
23x: Send CR/LF to serial output AndrewElford 6
CR300 RS232 Monte 4
Measure Current with shunt and CR6 kcopeland 7
TCP/IP connections PPeters 15
CR300 maximum current. m.calispa 1
Data From Loggernet to Excel CassStead92 2
How to wiring CR300 to a multiplexer (AM16/32B)? JessicaCardoso 2
File compression JamesMc 3
valve control with CR Basic Hydro_engineer 5
Loggernet 4.2.1 not recognized for update mcommelin 1
other FILECLOSE error codes and their meaning smile 1
PS100 and Gel Battery BiTFx 1
Is it possible to connect a CR300 to a NL240, a RF4xx and a SDI-12 sensor? BRCBorges 2
CR1000 with slow scan stopped (OS32.02) smile 2
senddata, tables Flavio 0
Which data logger for Nortek Vectrino profiler (ADV) and the Nortek Signature1000 (ADCP) on salty environment? Or should I stick with fanless industrial PC? Venexiano 1
A300 sharing the same control port as an SDI12 sensor Tegan 2
How to connect hall effect flow rate sensor to CR6 Haitham 1
Data transmission problem dkapaso 4
NaN for FC_QC Sharai 0
The datalogger could not compile the program. line 50. Too many parameters: -1 paddysullivan 2
Combining data tables with different intervals jarlu 3
CR310 Digital input Spol 1
Problem Connecting to NL240 over USB ACramp 0
Using command SDI12Recorder () Apafos 1