CM225 Solar Sensor Mounting Stand

Overview

The stainless-steel CM225 attaches one pyranometer or quantum sensor to a mast, crossarm, or pole (1.0 to 2.1 in. OD). Many pyranometers and quantum sensors also require a leveling base that secures the sensor to the CM225 as well as level the sensor.

The CM225 consists of a rectangular plate, mounting bracket, U-bolts, lock washers, and nuts.


Images


Specifications

Material 12 gage, 304 stainless steel
Dimensions 8.9 x 11.3 x 6.4 cm (3.5 x 4.5 x 2.5 in.)
Weight 0.34 kg (0.75 lb)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Mounting Equipment

Compatible Note
CM10 (retired)
CM106 (retired)
CM106B
CM110
CM115
CM120
CM202
CM204
CM206
CM6 (retired)
UT10
UT30

Miscellaneous

Compatible Note
CMP11-L Assumes the CMP11 is not housed in the CVF4 Heater/Ventilation Unit.
CMP21-L Assumes the CMP21 is not housed in the CVF4 Heater/Ventilation Unit.
CMP6-L Assumes the CMP6 is not housed in the CVF4 Heater/Ventilation Unit.
CS300-L (retired) Requires the 18356 Leveling Base.
LI190SB-L (retired) Requires the LI2003S Leveling Base.
LI200S-L (retired) Requires the LI2003S Leveling Base.
LI200X-L (retired) Requires the LI2003S Leveling Base.

Additional Compatibility Information

Mast or Vertical Pole

The U-bolt and V-block use the bracket's side holes to attach to a tripod or tower mast or to a user-supplied vertical pole.

User-Supplied Vertical Pole

The CM225 can mount to a pipe with a 1 to 2.1 inch outer diameter.


Articles and Press Releases