GRANITE 9 Measurement and Control Data-Acquisition System
Meeting Your Top Testing Priorities
Flexible for use in the lab and out in the field
weather applications supported water applications supported energy applications supported gas flux and turbulence applications supported infrastructure applications supported soil applications supported

Overview

The Granite™9 and Granite™10 are the most computationally powerful data-acquisition devices from Campbell Scientific. As an all-digital measurement and control DAQ, the Granite 9 is designed as the core of the data-acquisition network, integrating with all GRANITE measurement modules, including the Volt 108, Volt 116, Temp 120, VWire 305, and CH400. 

Read More

Benefits and Features

  • Traditional network connections via Ethernet port
  • EPI port switch for high-speed connection to all GRANITE measurement modules
  • Onboard storage of streaming data with 2 GB of DDR3 SDRAM and a 64 GB solid-state hard drive (SSD)
  • Built-in GPS for network synchronization

Images

Detailed Description

The Granite 9 enables you to perform the following:

  • Standard measurement functions
  • Advanced math and processing functions
  • Control functions

A complete GRANITE system installation may include the following components:

  • Granite™Chassis
  • Granite 9
  • CH400
  • Power source (mains or solar)
  • Software

Specifications

-NOTE- Additional specifications are listed in the GRANITE 9 Specifications.
Power Requirements 9.6 to 32 Vdc (voltage input)
Real-Time Clock Accuracy ±3 min. per year
Operating Temperature Range
  • -40° to +70°C (standard)
  • -55° to +85°C (extended)
  • Non-condensing environment
Case Material Stainless steel 304 and aluminum 6061
Communications Ports
  • Ethernet
  • USB Micro B
  • USB host
  • CS I/O
  • 0 to 5 V serial
  • SDI-12
  • RS-485
  • RS-422
  • CPI/RS-232
  • EPI
Data Storage Ports
  • microSD
  • USB host
Digital I/O 8 terminals (C1 to C8) configurable for digital input and output. Terminals are configurable in pairs for 5 V or 3.3 V logic for some functions.
Internet Protocols Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP (APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, Telnet, HTTP(S), SFTP, FTP(S), POP3/TLS, NTP, SMTP/TLS, SNMPv3, CS I/O IP
Communication Protocols CPI, EPI PakBus, PakBus Encryption, SDM, SDI-12, Modbus RTU / ASCII / TCP, DNP3, custom user definable over serial, UDP, NTCIP, NMEA 0183, I2C, SPI
Warranty
  • 3 years standard (against defects in materials and workmanship)
  • Optional: An additional 2 years (against defects in materials and workmanship), bringing the total to 5 years
Battery-backed SRAM for CPU Usage & Final Storage 4 MB
Data Storage
  • 4 MB SRAM + 128 MB NOR flash (Storage expansion of up to 16 GB with removable microSD flash memory card.)
  • 64 GB SSD
Active Current Drain, Average
  • ~6 W
  • 255 mA input (24 V input)
  • 495 mA input (12 V input)
Static Vibrating-Wire Measurements Not supported
Dimensions 21.4 x 12.0 x 5.0 cm (8.4 x 4.7 x 2.0 in.)
Additional clearance required for cables and leads.
Weight 1.0 kg (2.2 lb)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Data Loggers

Compatible Note
CR1000X
CR6

Measurement and Control

Compatible Note
CDM-A108 (retired)
CDM-A116 (retired)
CDM-VW300 (retired)
CDM-VW305 (retired)
GRANITE TEMP 120 Requires OS version 1 or greater.
GRANITE VOLT 108
GRANITE VOLT 116
GRANITE VWIRE 305

Software

Compatible Note
DevConfig
LoggerNet
PC200W (retired)
PC400
RTDAQ

Miscellaneous

Compatible Note
GRANITE Chassis

Downloads

Granite 9 OS v.2.01 (6.33 MB) 04-05-2021

This OS should only be updated via direct connection with the Granite 9. 

This download is for the Granite 9 datalogger. Execution of this download places the Operating System file(.obj) on your computer. It also updates the CRBasic Editor compiler and support files. 

Note/Warning: Campbell Scientific always recommends updating operating systems on site if possible. When remote updates are required, it is recommended that you implement the necessary precautions to handle unexpected OS upload complications. All datalogger settings should be retained when updated remotely. If you choose to roll back to a previous operating system, the datalogger settings will be reset to default.

Watch the Video Tutorial: Sending an OS to a Local Datalogger.

View Revision History

CPI Calculator v.1.0 (2.49 MB) 06-07-2016

The CPI Calculator is a downloadable Microsoft Excel spreadsheet used to estimate the usage and capacity of a CPI network.  The calculator provides an overview on CPI devices including the CDM-A108, CDM-A116, CDM-VW300, CDM-VW305, and the CSAT3B.  The calculator can also estimate the measurement speed of the CDM-A108 and CDM-A116 based on the number of channels and measurement parameters.

 

The CPI Calculator is an estimation tool and will help you better understand and design CPI networks by considering the following:

  1. What is the capability of each CDM or CPI device
  2. What is the CPI network capacity
  3. How much of the CPI capacity are the CDMs or CPI devices using

 


VWire 305 program example v.1 (2 KB) 16-01-2020

Program to read 20 Hz dynamic data from two VWire 305 analyzers measuring eight channels each.


Listed Under

Other Accessory for the following products: