Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
SDI-12 failed param(nmsu) 0
Calibration of old dataloggers and multiplexers shishirbt 1
RX and TX control port and com port furban 5
Writing data to CR800 vie Modbus alackey 1
Email Relay - Is Konectgds Down? Brad74 1
Delete record instruction AlexMorenza 2
Use of control port (portset) and serialopen Christopher 2
Different calibration certificate Aniq2019 1
multiple CR1000 and NL115 behind gateway Paul Heinrich 1
How to convert DAT file to CSV using LoggerNet 4.4.2 ? Thanks Suma Mani 1
CR300 , Cellular, Serial Port, and PakBus Bret Berger 7
Data series can be hid or shown with the flip of a switch clbremer71 0
Sync GPS time over ethernet between loggers Rasmus Jensen 3
Update Will Not Install Larry@UFL 0
Conditional data Makada 6
CR1000X 20Hz scan rate contiunuously for 5 years? chalit 0
CR1000 restart instruction TuyenNL 3
Activity IP port jobar 0
Are Raven XTV modems affected by Verizon CDMA sunset? Bo 2 4
Data Issue since replacing a battery SteveA 2
how to Synch CCFC's clock with CR6 which have been set as an ntp server？ chengchen 0
Can the same column be entered twice in an RTMC data table? Tex 0
Modbus question for digital barometer CESPool 3
CR1000 - data question SmartKG 0
CR1000X OS 3.02 Updated: 04-22-2019 (Minor) PulseCount() moho 2
SP LITE2 - Very High kW Readings. Brad74 0
How to send data to a OPC UA server from a CR Mazhar 0
Problem with raw data datle_95 0
Questions about easyflux-dl-cr6op sanshui 0
SR50AT false readings usui 0