Overview
The 16755 is a high-gain (13 dBd), directional (Yagi) antenna used with our 2.4 GHz radio transceivers. It is intended for longer distances, and for communicating to one other station (due to narrow beam width).
Note: In the image, the antenna is mounted to a stand, which is sold separately.
Read MoreImages
16755 antenna mounted to a stand (sold separately)
Similar Products
Compatibility
Spread Spectrum Transceivers
Contemporary products that use this antenna are the RF416 Spread Spectrum Radio, RF432 Spread Spectrum Radio, CR216X Datalogger, AVW216 Vibrating Wire Interface, and NL240 Wi-Fi Network Link. The 16755 is also compatible with our retired 2.4 GHz spread spectrum radios and data loggers.
Antenna Cables
The following cables can be used:
- COAXNTN-L—connects the antenna to the radio, data logger, or interface via a surge protector.
- COAXRPSMA-L—connects the antenna to the radio, data logger, or interface when surge protection is not required.
Mounting Hardware
The antenna includes mounting hardware that accommodates a pipe of up to 5.2 cm (2.0 in.) outer diameter.
Specifications
| Gain | 13 dBd |
| Frequency Band Supported | 2.4 GHz |
| Connector | Type N female |
| Antenna Type | Enclosed Yagi (directional) with mounting hardware |
| Included Hardware | Mast mount that accommodates a pipe of up to 5.2 cm (2.0 in.) outer diameter |
| Dimensions | 49.53 x 15.24 x 10.16 cm (19.5 x 6.0 x 4.0 in.) |
| Weight | 907.19 g (2.0 lb) |
Listed Under
Common Accessory for the following products: