FAQs Frequently Asked Questions About our Products and Solutions

Ask a Question Ask a Question

All FAQs (1680 total: showing 1181-1200)

How is it possible to measure different sensors at different sampling frequencies in a single CR5000 program?
Can a CR5000 and a CR1000 be networked so that the data from both can be downloaded over a single cellular digital modem?
Is there a way to verify that a remote station radio is actually connected to a CR5000?
What additional equipment is needed to send data from a CR5000 through a cellular digital modem?
How can four sensors that produce an RS-232 signal be connected to a CR5000?
What is the best way to allow a digital modem to receive data from multiple CR5000s?
When a CR5000 is powering, what would cause the data logger display screen to turn black?
What type of cable is needed to communicate between a cellular digital modem and multiple CR5000s?
What type of filtering is available for a CR5000?
Does the CR5000 have anti-aliasing filters on its analog inputs?
In a CR5000 program, what is the best way to create two separate scans running in PipeLineMode?
Can a CR5000 be used to provide data to web pages?
What is the fastest way to download more than 5 million records from a CR5000 to a PC?
Why might a CR5000 suddenly lose connection via an RS-232 port with a computer running LoggerNet?
What is the largest memory card that can be used with a CR5000?
Can the SW12 instructions for the CR5000 be placed in a conditional statement?
For a CR5000, what is the recommended frequency for manufacturer calibration and parts replacement?
Can a CR800 poll a CR5000 to get low-frequency data via RF?
Can the burst mode be used with a CR5000? If so, what is the maximum sampling rate?
In a CR5000, can a control terminal be configured as a pulse terminal?

Previous Next