EC150
 
EC150 CO2/H2O Open-Path Gas Analyzer System
 
Sensing Head Options - show details
-GH -GH Gas Analyzer Only
Choose this option to get an instrument that only measures absolute carbon dioxide and water vapor densities, air temperature, and barometric pressure.
-SS1 -SS1 w/CSAT3A, Std
-SS2 -SS2 w/CSAT3A, Harsh
-SS1 Sonic Carrying Case Opt - show details
-NC -NC No Sonic Case
-SC -SC Sonic Carrying Case
It is recommended to purchase a carrying case to protect the sensor
-SS2 Sonic Carrying Case Opt - show details
-NC -NC No Sonic Case
-SC -SC Sonic Carrying Case
It is recommended to purchase a carrying case to protect the sensor
CR6 Options
-NM -NM No CR6 Mounting
-MM -MM CR6 Mount w/o DL
-6NA -6NA w/CR6-NA Mounted
Pressure Sensor Options - show details
-BB -BB Basic Barometer
Choose this option to get a barometer with a total accuracy of ±2.2 kPa (0° to +85°C).
-EB -EB Enhanced Barometer
Choose this option to get a barometer with a total accuracy of ±0.85 kPa (0° to +60°C).
EC150 Carrying Case Opt - show details
-NG -NG No EC150 Case
-GC -GC EC150 Carrying Case
The rigid carrying case holds the gas analyzer.

Add to your Quote List


Common Accessories

L31022
 
The Zero Air Generator is a low-cost, handheld source of zero air (air that has been scrubbed of CO2 and water vapor) to be used for zeroing infrared gas analyzers (IRGAs). The 31022 consists of a small pump and a molecular sieve. The pump is powered by 2 AA batteries.
38476
 
There are three memory card options. The 38476 is one of them. The 38476 is a 16 GB microSD flash-memory card designed for use in harsh conditions often presented by environmental and industrial applications in which customers require higher reliability, endurance, and performance but also seek a cost-effective solution to meet budget-planning requirements.
L27158
 
There are three memory card options. The 27158 is one of them. The 27158 is a 2 GB microSD flash-memory card. This card is designed for use in harsh conditions often presented by environmental and industrial applications. The card uses single-level cell (SLC) memory, which aids in its ability to operate over wide temperature ranges, consume less power, and provide a reliable data-storage medium through more read-write cycles.
L17752
 
The 17752 is a multiple-slot, high-speed reader/writer that allows a computer to read a memory card. When used with Campbell Scientific equipment, the 17752 typically reads data stored on CompactFlash or microSD cards, but it can read many different types of memory cards. The 17752 connects to the computer's USB port.
CR1000KD
 
The CR1000KD is a portable keyboard and display screen for our data loggers that have a CS I/O port, including the CR1000, CR1000X, CR800, CR850, and CR6. It allows you to check the data logger's status, display or plot sensor readings and stored values, and enter numeric data or change port/flag state. One CR1000KD may be carried from station to station in a data logger network.

Other Accessories

EASYFLUXWEBH
 
EASYFLUXWEBH EasyFlux Web Software CSI-Hosted One-Time Implementation Fee
 
EasyFlux™ Web CSI-Hosted is a web-based software tool for monitoring CR6- and CR3000-based Campbell Scientific, Inc., eddy-covariance systems. EasyFlux™ Web CSI-Hosted is hosted on Campbell Scientific's own Microsoft Azure server, which allows for automatic updates and maintenance of the software. After users create an account, they are given their own IP address to allow them to easily connect to their data from an Internet-connected device. Monitoring a network of eddy-covariance systems is made easy with real-time data monitoring, customizable alerts, and data download capabilities. EasyFlux™ Web is compatible with open- and closed-path eddy-covariance systems.
EASYFLUXPC
 
EasyFlux™ PC is a free computer program that processes high frequency time series data, collected using a Campbell Scientific eddy-covariance flux system, into fluxes following community accepted practices. Fully corrected fluxes of CO2, latent heat (H2O), sensible heat, and momentum are available, in generic, AmeriFlux, and GHG-Europe ASCII formats.
EASYFLUXDL
 
EasyFlux™ DL is a free CRBasic program that enables a datalogger to report fully corrected fluxes of CO2, latent heat (H2O), sensible heat, and momentum from a Campbell Scientific open-path eddy-covariance (EC) system. Final fluxes are processed from raw high frequency time series data by applying commonly used corrections found in scientific literature.
EOSFD
 
The eosFD uses the patented Forced Diffusion (FD) technology to measure soil CO2 flux directly using an NDIR sensor and small internal diaphragm pump. It features onboard data logging capabilities that enable it to be a stand-alone sensor; however, it can also deliver analog or serial data to Campbell Scientific data loggers. This sensor compliments a Campbell Scientific eddy-covariance system. The included eosLink software enables you to connect, configure, and collect data directly from the sensor.

Replacement Parts

4905
 
The 4905 Single 4-Unit Silica Desiccant Bag is used to desiccate the EC150's enclosure. It needs to be periodically replaced.
 
This wick can be placed on the bottom snout of the gas analyzer to help wick away rain droplets from the optical window. Recommended for sites with frequent rain.
 
This wick can be placed on the top snout of the gas analyzer to help wick away rain droplets from the optical window. Recommended for sites with frequent rain.
 
The EC100-EB includes the EC150 electronics box and a Campbell Scientific CS106 barometer mounted inside of the electronics box.
26559
 
The CM250 is a leveling mount kit for attaching the EC150 to a crossarm.

Services

 
The 27311 provides a recalibration with zero and span. When drift between zero and span checks seems unstable, or when diagnostic output indicates a problem, the instrument should be sent in for a full factory calibration with zero and span. An RMA is required.
 
A zero and span should be done when ambient conditions change significantly (i.e., seasonally). If the user does not have a zero/span kit to do this himself/herself, it can be sent in to Campbell Scientific. An RMA is required.