CSAT3B 3-D Sonic Anemometer w/Integrated Electronics
Sonic Environment Option
-SS1 -SS1 Sonic Sensor, Std
-SS2 -SS2 Sonic Sensor, Harsh

Add to your Quote List

Common Accessories

The 10080 is a thermocouple cover for the CSAT3's FW05 connector.
Measures atmospheric temperature gradients or fluctuations with research-grade accuracy.
Protects thermocouples during shipping and transport.
FWC-L Connector Cable for Fine Wire TCs
Connects a fine-wire thermocouple to a data logger.
The CS106 measures barometric pressure for the range of 500 to 1100 hPa (mBar). This range equates to from below sea level (as in a mine) to over 15,000 feet above sea level.
HYGROVUE10 Digital Temperature and Relative Humidity Sensor with M12 Connector
The HygroVUE™10 offers a combined temperature and relative humidity element in an advanced digital sensor that is ideal for weather networks. The electronics within the sensor provide accurate measurements, and the sensor is easy to use. The digital SDI-12 output allows a simple connection and measurement by many data logging systems. Another benefit is that this digital output avoids the extra errors associated with measuring analog sensors.
Cable Length Options
-10 -10 w/10ft per sensor
-17 -17 w/17ft per sensor
-33 -33 w/33ft per sensor
-50 -50 w/50ft per sensor
Cable Termination Options
-PT -PT w/Tinned Wires
-QDP6 -w/Pre-Wire Connector
The 38476 is a 16 GB microSD flash-memory card designed for use in harsh conditions often presented by environmental and industrial applications in which customers require higher reliability, endurance, and performance but also seek a cost-effective solution to meet budget-planning requirements.

Other Accessories

The HUB-SDM8 is intended for customers who want to connect up to five external SDMs to the same data logger, as well as run multiple power connections using 16 AWG wire. The HUB-SDM8 comprises an environmental enclosure with eight compression fittings (two larger) and eight terminal strips.
The 28899 is a 2 ft CAT6 Ethernet cable used to connect a HUB-CPI to a CPI socket on a data logger, or to connect one HUB-CPI to another HUB-CPI.