CR1000X
 
CR1000X Measurement & Control Datalogger
 
Communication Options
-NA -NA No Additional Coms
Temperature Ranges
-ST -ST -40 to +70C
-XT -XT -55 to +85C
Warranty Lengths
-SW -SW Standard 3yr Warranty
-XW -XW 4yr Warr Extension
Calibration Options - show details
-CC -CC Campbell Calibration
The data logger is calibrated at Campbell Scientific over the selected temperature range, and the certificate is made available electronically.
-IC -IC ISO 17025 Calibration
In addition to the Campbell Scientific calibration over the selected temperature range, the data logger calibration is verified by an independent certifying body that is A2LA accredited to the ISO 17025 standards. A paper certificate of the A2LA ISO/IEC 17025 accredited calibration is provided.

Add to your Quote List


Common Accessories

CR1000KD
 
The CR1000KD is one of two display options. The CR1000KD is a portable keyboard and display screen that allows you to check the data logger's status, display or plot sensor readings and stored values, and enter numeric data or change port/flag state. One CR1000KD may be carried from station to station in a data logger network.
CD100
 
The CD100 is one of two display options. The CD100 is a mountable display with a keypad for data logger data entry and display. It has a vacuum flourescent display for responsive use through a very wide operating temperature range. Its operation is the same as the CR1000KD.
L31055
 
The 31055 adapts an RS-232/CPI RJ45 port to a DB9 male connector. This cable is offered to make it easier to connect a DCE serial device, such as a cellular modem, to the RS-232/CPI port.
L31056
 
The 31056 adapts an RS-232/CPI RJ45 port to a DB9 female connector. This cable is offered to make it easier to connect a DTE serial device, such as a computer or terminal server, to the RS-232/CPI port.
SC110
 
The SC110 is used to connect a control port pair to a 9-pin serial device such as a PC or communications modem. One end of each cable provides stripped, tinned leads for attachment to the control ports on the data logger. On the other end, one of the cables is fitted with a 9-pin male connector, and the other cable is fitted with a 9-pin female connector.
L28899
 
The 28899 is one of two RJ45 cables that may be needed for connecting to the Ethernet or CPI.The 28899 is a 2 ft, unshielded CAT6 network cable with RJ45 connectors. It is typically used to connect CDM devices together or to an SC-CPI. This cable is also used to connect one of our many Ethernet-capable products to an Ethernet device or network connection.
 
The 28900 is one of two RJ45 cables that may be needed for connecting to the Ethernet or CPI.The 28900 is a 10 ft, unshielded, CAT5e network cable with RJ45 connectors. It is typically used to connect one of our many Ethernet-capable products to an Ethernet device or network connection.
L27158
 
Campbell Scientific recommends using at least one microSD card with the CR1000X, and the 27158 is one option. The 27158 is a 2 GB microSD flash-memory card. This card is designed for use in harsh conditions often presented by environmental and industrial applications. The card uses single-level cell (SLC) memory, which aids in its ability to operate over wide temperature ranges, consume less power, and provide a reliable data-storage medium through more read-write cycles.
38476
 
Campbell Scientific recommends using at least one microSD card with the system, and the 38476 is one option. The 38476 is a 16 GB microSD flash-memory card designed for use in harsh conditions often presented by environmental and industrial applications in which customers require higher reliability, endurance, and performance but also seek a cost-effective solution to meet budget-planning requirements.

Other Accessories

SC-USB
 
The SC-USB allows Campbell Scientific data loggers to communicate directly with computers that have a USB interface. The SC-USB is optically isolated, which helps eliminate noise pickup associated with PC power supplies and ground connections. The SC-USB can be used in place of an SC32B interface.

Replacement Parts

L505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.
27555
 
The 27555 is a USB Type A to Micro B, male-to-male cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.