AP200 CO2/H2O Atmospheric Profile System

Add to your Quote List

Common Accessories

The 38476 is a 16 GB microSD flash-memory card designed for use in harsh conditions often presented by environmental and industrial applications in which customers require higher reliability, endurance, and performance but also seek a cost-effective solution to meet budget-planning requirements.
The 27158 is a 2 GB microSD flash-memory card. This card is designed for use in harsh conditions often presented by environmental and industrial applications. The card uses single-level cell (SLC) memory, which aids in its ability to operate over wide temperature ranges, consume less power, and provide a reliable data-storage medium through more read-write cycles.
The 17752 is a single slot, high-speed reader/writer that allows a computer to read data stored on CompactFlash card. The 17752 connects to the computer's USB port.
The 107 needs to be housed in the 41303-5A, a naturally aspirated, 6-plate radiation shield. The 41303-5A can attach to a crossarm, mast, or a user-supplied pipe with a 1.0" to 2.1" OD.
The RAD06 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement.
28549 AP200 or CPEC200 AC/DC Power Adapter Kit
The 28549 can be mounted in the AP200 enclosure to supply the AP200 from AC mains power.
- Basic use, single sensor
/M Mid use,up to 10 Sensors
/Log 10 sensors with logging
- Single Sensor
/M 0-10 Sensor
/Log 0-10 Sensor w. logging

Other Accessories

The CR1000KD is offered as an accessory for customers who want the keyboard display but do not want it mounted inside the enclosure.

Replacement Parts

The 4905 Single 4-Unit Silica Desiccant Pack is packaged in Tyvek. It is used to desiccate the AP200 enclosure and will periodically need to be replaced.