Overview
The 14291 power cable terminates in a barrel plug on one end and two pigtails on the other end. The cable is 2 ft long.
Read MoreImages
Detailed Description
For some circumstances, the 14291 Field Power Cable is required for the data logger to power a spread-spectrum radio, MD485 Multidrop Modem, or SC532A. The cable's right-angle barrel plug connects to the device, and its two-conductor pigtail connects to the 12V and G terminals of a data logger.
The 14291 is required when the device is connected to the data logger's RS-232 port instead of its CS I/O port. It is also required when the device is connected to the CS I/O port of an older data logger. Newer data loggers supply 12 V power on pin 8 of their CS I/O port. Some older data loggers lack 12 V power on pin 8 and therefore require the 14291. The table below indicates whether or not 12 V is supplied on pin 8.
| 12 V on pin 8 |
Product Description |
| yes | CR10X wiring panel (black panel with green terminal blocks) |
| no | CR10WP Wiring Panels (black panel with gray terminal strips, not green) used with CR10s and CR10Xs |
| no | all CR10 silver wiring panels |
| yes | CR23X |
| yes | 21X with serial numbers >13,443 |
| no | 21X with serial numbers < 13,443 |
| yes | CR500 with serial numbers >1765 |
| no | CR500 with serial numbers < 1765 |
| yes | 700X with serial numbers >2779 |
| no | 700X with serial numbers < 2779 |
Prior to June 23, 2009, the 14291 had a straight barrel connector. The 14291 was redesigned to have a right-angle connector so that the cable would fit better in an enclosure.
Specifications
| Voltage Rating | 300 V |
| Amperage | 7 to 10 A |
| Length | 0.6 m (2 ft) including connector |
| Weight | 22.7 g (0.05 lb) |
DC Plug |
|
| Outer Diameter | 0.55 cm (0.22 in.) |
| Inner Diameter | 0.25 cm (0.1 in.) |
| Height | 1.2 cm (0.47 in.) |
Connector |
|
| Outer Diameter | 0.94 cm (0.37 in.) |
| Length | 3.0 cm (1.18 in.) including cable strain relief |
| Height | 1.8 cm (0.71 in.) |