Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

csv external files om Loggernet

TaCaPica Sep 23, 2021 04:03 PM

Hi

we need to show data on a RTMCPro project that uses data from Campbell dataloggers and other sources. The external data is in the csv format but we are not being capable of showing it on your project.

Any toughts on it that may be of assistence?

Regards.

Makada Sep 23, 2021 04:58 PM

Hi,

Do the following:

In RTMC project screen, double click on the right lower side (in green) "Connected Server".

Now you get a new screen, Data Sources.

Click Add. 

"Add file Data Source"

Choose your CSV file.

With kind regards. 

* Last updated by: Makada on 9/23/21 @ 4:59 PM *
JDavis Sep 24, 2021 09:31 PM

For RTMC to read the data files, they need to be in a csv format that matches one of the formats used by Campbell Scientific. The timestamp and record number columns are important.

The common TOA5 format is described in the datalogger manual:

https://help.campbellsci.com/CR1000X/Content/shared/Details/Data/About_Data_Tables.htm?tocpath=Working%20with%20data%7C_____4 

TaCaPica Sep 28, 2021 04:33 PM

Hi thanks for your help

Another question, we have RTMCPro on our client because we thought that the simpler version of RTMC could be a problem as files go.

The files on RTMCPro have to follow the same struture? ou could they be just csv (,. files)?

Regards

Log in or register to post/reply in the forum.