Frequently Asked Questions About our Products and Solutions
Ask a Question
Ask a Question
What are some distinguishing features of the MetSens compact weather sensors?
MetSens has a compass module that outputs at 1 Hz real time without affecting any other measurements, which allows the correction of wind direction if the station is installed on moving ice.
MetSens has a two-year service life, which is especially helped by the use of a double-louvered radiation shield to reduce the flow of contaminants getting to the temperature/humidity probe.
MetSens has an option for GPS.
MetSens has a wind speed resolution of 0.01 m/s, whereas most all-weather sensors have a resolution of 0.1 m/s.
MetSens has a dew point accuracy of ± 0.3°C, whereas most all-weather sensors have an accuracy of > ±0.7°C.
MetSens temperature resolution is for the full-range temperature at 0.1°C, whereas other all-weather sensors change to 0.2° at the extremes.
MetSens offers users the option to use any industry-standard tipping bucket rain gage (MetSens550).
MetSens provides RS-232, RS-485, Modbus, and SDI-12 from all models.
MetSens uses Intelligent Signal Processing (ISP) and Adaptive Gain Control (AGC), which have been proven worldwide to provide good quality data.
MetSens does not indicate a drop in wind speed if the temperature drops or if rain occurs, whereas this is fairly common in other all-weather sensors.
This was helpful
What are data loggers?
What should be done if Short Cut does not list the CC5MPX as a device that can be added?
Is there a way to reset the CC5MPX to its factory settings?
Do the vane and anemometer of the 034B-L produce analog or digital signals?
How can images from a CC5MPX be downloaded directly through the Ethernet port using a remote script rather than using a browser or LoggerNet?
Using a CompactFlash module, a data logger, and the BMP5 Direct SDK, how can data be downloaded from the memory card instead of the CPU buffer?
Using BMP5 Direct SDK, how can the libraries be compiled for an x64 platform?