Toggle navigation
Products
Solutions
Support
About
Home
Products
Solutions
Support
About
Quote List
Contact
Regional Websites
Regional Websites
Africa
Australia
Brasil
Canada
Centro Caribe
Deutschland
España
Europe
France
India
Japan
United States
ภาษาไทย
中国
Country Directory
Log In
FAQs
Frequently Asked Questions About our Products and Solutions
Ask a Question
Ask a Question
Search
All FAQs
(1680 total: showing 801-820)
Can a CS470 or CS471 be used to measure rainfall if the majority of the time there is no water to be measured?
Can the 4 to 20 mA analog output on the CS470 or the CS471 be used with a PLC instead of a Campbell Scientific data logger?
Using a CS470 or CS471, how can bad measurements be prevented because of river silt or mud?
What should be done to prevent a CS470 or CS471 from being damaged by the current of a river?
Do the CS470 and the CS471 require a separate gas pump or gas bottle to drive the system?
What is the maximum length of tubing that can be used with a CS470 or CS471?
Is the only difference between the CS470 and the CS471 in their accuracy?
What is the best way to replace the sealant around the KH20 source/detector tubes?
Where is the KH20 listed as a component in the Short Cut (SCWin) program?
Is there a composite program for eddy-covariance measurements that uses the KH20?
How does the KH20 work?
What is PakBus encryption?
Can files on a PakBus data logger be hidden?
Which data logger files can be encrypted?
How effective are pass-code lockouts for CRBasic PakBus data loggers?
How can a data logger be made more secure?
Is there a module to read a group of fine-wire thermocouples?
Can Campbell Scientific fine-wire thermocouples measure the temperature of a 50 µm by 50 µm flat surface?
Is it possible to measure the absolute temperature with an accuracy of 0.01°C using the FW05? Or do the thermocouple output error and the thermocouple voltage error inhibit such accuracies?
How is sensible heat flux measured using a CSAT3/3A/3H and an FW05?
Previous
Next