Overview
The R.M. Young Model 86004 Ultrasonic Anemometer is a 2-axis, no-moving-parts wind sensor with integral 60 watt heater for use in cold climates. It is ideal for general meteorological applications requiring accurate and reliable wind measurement. Heaters integrated into the transducers and housing enhance performance in cold conditions.
The sensor features durable, corrosion-resistant construction with sensitive ultrasonic transducers secured in a streamlined molded frame. The 86004 is fully wind-tunnel tested and calibrated to provide accurate wind measurement over a wide operating range.
Images
Detailed Description
The standard sensor offers a variety of useful output options. Analog voltage outputs are provided for wind speed and wind direction. A variety of serial output formats are also available. These include ASCII text, RMYT (compatible with R.M Young displays), and NMEA formats.
The sensor installs on readily available 1 inch (IPS) pipe. Wiring connections are made in a convenient weatherproof junction box; special mounting adapters and connectors are not required.
Specifications
Wind Speed: 0 to 70m/s (0 to 156 mph)
- Resolution: 0.01 m/s
- Threshold: <0.01 m/s
- Accuracy: ± 2% or ± 0.1 m/s (30 m/s), ± 3% (70 m/s)
- Response Time: <0.25 seconds
Wind Direction: (0 to 360 degrees)
- Resolution: 0.1 degree
- Threshold: <0.01 m/s
- Accuracy: ±2 degrees
- Response Time: <0.25 seconds
Serial output: (RS-232 or RS-485)
- Formats: ASCII, ASCII polled, RMYT, NMEA
- Baud Rates: 1200, 4800, 9600, 38400
- Units: m/s, MPH, Knots, Km/hr
- Wind Format: Speed & Direction or U & V
- Status Indicator: Standard with ASCii & NMEA
Analog Outputs: 0-5000 mV or 4-20 mA
- Analog Wind Scale: 0-100 m/s
- Analog Direction Scale: 0-360 or 0-540 degrees
Output Update Rate: 0.1 to 10 Hz
Power Requirement:
- Heater: 24 VDC, 2.5 A
Environmental:
- Operating Temperature: -50 to +60 °C
- Protection Class: IP66
Dimensions: 29 cm high x 11 cm wide
- Weight: Weight: 0.4 kg (0.9 lb)
- Shipping Weight: 1.0 kg (2.2 lb)
Compatibility
Mounting
The 86004 can be mounted with either the 019WM or 019WMTOW mounting kits.
Datalogger Considerations
The 86004 uses the datalogger's digital. It is not compatible with any of our retired dataloggers.
Compatible Dataloggers
| CR200(X) Series | CR800/CR850 | CR1000 | CR3000 | CR5000 | CR7X | CR9000X |
 |
|
|
Related Documents
Manuals
Downloads
86SETUP Program v.1.1 (1.4 MB) 29-04-2015
Used to configure or connect 86000-series anemometers sensors.