The ZX300 (previously known as the ZephIR 300) is a continuous-wave (CW) lidar system that provides remote wind measurements across ten user-defined heights from 10 m to 200 m. It is ideal for applications that require wind measurements at multiple heights, and for locations where the installation of a tall tower is difficult.
The ZX300 has been used worldwide for site assessment, prospecting, and turbine micrositing; extreme flow conditions; power-curve assessment; permanent wind-farm anemometry; and complex site analysis. For more information, see the ZX Lidars website at www.zxlidars.com.
A Performance Verification Certificate is also available for purchase. Contact the Renewable Energy Group at Campbell Scientific for more information.Read More
|Measurement Height Range||10 to 200 m (33 to 656 ft)|
|Number of Measurement Heights||10 (user-configurable)|
|Sampling Rate||50 Hz|
|Averaging Period||1 second upwards (user-configurable)|
|Scanning Cone Angle||30°|
|Accuracy||< 0.5% (as measured against a calibrated moving target)|
|Range||< 1 to 70 m/s|
|Temperature Range||-40° to +50°C|
|Power Consumption||69 W|
|Input Power Range||9.5 to 13.5 Vdc or 90 to 264 Vac|
|Weight||55 kg (121.3 lb)|
|10 Minute Averaged Data||80 kB/day|
|3 Second Data||3 MB/day|
|Laser Classification||Class 1|
|Eye Safety Standard||IEC 60825-1|
|IP Rating||IP67 (excludes external fans)|
|EMC Compliance||EN55022 Class A, EN61326 Industrial, FCC Radiated and Conducted Emissions|
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Number of FAQs related to : 4
Expand AllCollapse All
Campbell Scientific is the exclusive distributor of ZX300 systems in North America, providing sales, support, and service. Campbell Scientific and ZX Lidars engineers also work closely together on current product features and product development.
Yes. Contact Campbell Scientific for pricing and availability.
The ZX300 is compatible with the CR3000, CR1000, CR800, and CR850 dataloggers. These data loggers can communicate with the ZX300 to pull data and make it available through the data logger, while simultaneously making other environmental measurements. This functionality gives users the ability to collect their ZX300 data in the same manner as with their existing Campbell Scientific equipment. Users are also able to retrieve ZX300 data through other methods, protocols, etc., that are compatible with Campbell Scientific data loggers.
The ZX300 is a LiDAR (Light Detection And Ranging) measurement system used to make wind speed measurements at user-configurable heights between 10 to 200 m. The ZX300 is a coherent LiDAR that uses continuous-wave technology to gather high-quality wind-speed data. The ZX300 is well suited for both onshore and offshore applications, and it has a proven design with over three million hours of operation and 650 deployments in extreme conditions across the globe.