13947 Wall Charger

Overview

The 13947 wall charger supplies power to an NL100 or NL105 (retired) Ethernet interface. It accepts input voltages from 100 to 240 Vac, 50 to 60 Hz. The 13947 outputs 12 Vdc at 0.8 A. The wall charger has a 6 ft cord that terminates in pigtails for attachment to the interface's 12V and GND terminals.

Images

Specifications

Output Voltage 12 Vdc 800 mA
Input Voltage 100 to 240 Vac, 50 to 60 Hz
Cable Length 1.83 m (6 ft)
Weight 113.4 g (0.25 lb)

FAQs for

Number of FAQs related to 13947: 1

  1. If a data logger has not been used in a while and the internal battery is low, will the battery recharge if the data logger is connected to a power supply? Or does the battery need to be replaced?

    The internal battery is not rechargeable. In the case of low internal battery voltage, data will only be maintained as long as a power supply is connected. Collect all data from the data logger before disconnecting the power. Then, replace the internal battery.

    • For the CR800, CR850, CR1000, or CR3000 dataloggers, use the 13519 replacement lithium battery.
    • For the CR5000 datalogger, use the 13497 replacement lithium battery.
    • For the CR9000X and CR9000XC dataloggers, use the 8025 replacement lithium battery.

Visit the FAQ Library