Product Information - VDIV10.1
Print this page

10:1 Voltage Divider Module
Click picture for full size image. Click picture for full size image.
Brochure, Version Date: October, 2008  Brochure
Manual, Version Date: May, 2007  Manual

Features

  • Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
  • Makes accurate measurement of sensors with larger voltage outputs simple; sensors are measured with a voltage measurement instruction

General Description

Terminal input modules (TIMs) are small peripherals that provide completion resistors for resistive bridge measurements, and act as voltage dividers and precision current shunts. The modules attach directly to the datalogger's input terminals.* Each module provides circuitry to connect one sensor, except for the voltage dividers which allow connection of two single-ended sensors.

The VDIV10:1 divides the sensor's signal voltage by a factor of 10. Increased input settling time may be necessary to accommodate the relatively high resistance of the voltage divider. The resistors are ±0.02% 10 and 90 kohm.

* Note: Limited compatibility with silver CR10 wiring panel.

Download Adobe Acrobat Reader



Home | What's New | Products | Services | Applications | Courses & Shows | Museum | Literature | Privacy | About Us
Contact Us | Recruitment | Search | Links | Conversions | Download | Site Map

Questions? Please refer to the email address in this graphic if the adjacent link does not work.   Phone: (780) 454 2505
© 2003 Campbell Scientific (Canada) Corp.