Product Information - SVP110
Print this page

Surge Voltage Protector Bar Mount (requires SVP110T up to a maximum of 20 per bar)
Click picture for full size image.
 Manual, Version Date: March 1, 2003  Manual

General Description

The SVP110 provides transient protection for up to 22 conductors. Typical usage is to place the SVP110 in line between sensors and a Campbell Scientific datalogger to supplement the datalogger's built in surge protection.

The SVP110 is designed to mount on Campbell Scientific's standard enclosure back plates with 1 inch centered, pre-punched square accessory mounting holes. A green 14 AWG ground wire is provided for connection to the grounding chuck in the ENC 12/14 and ENC 16/18 enclosures.

The SVP110 consists of one or more surge protectors mounted on a DIN rail bracket. A single end plate is used to cover the last surge protector.

Specifications

Length: 6.6 in
Width: 2.6 in
Height: 2.72 in
Mounting Hole Spacing 6.0 in (Center to Center)

Download Adobe Acrobat Reader



Home | What's New | Products | Services | Applications | Courses & Shows | Museum | Literature | Privacy | About Us
Contact Us | Recruitment | Search | Links | Conversions | Download | Site Map

Questions? Please refer to the email address in this graphic if the adjacent link does not work.   Phone: (780) 454 2505
© 2001 Campbell Scientific (Canada) Corp.