CSC Product Information

Product Information - RF401

Spread Spectrum Radio - 910 to 918 MHz

Model	Temperature Range
RF401	-25° to +50°C
RF401-XT	-55° to +85°C
Brochure Manual Download the current Operating System.

Features

Replaces our RF400 Spread Spectrum Radio
Rugged, low-cost transceivers
100 mW, 910 to 918 MHz frequency
Frequency-hops over 25 channels
An individual FCC license not required
Can be used in the field as a transceiver or in the office as the base station
Power provided by datalogger, PS100/A100 combination, or CH100/12Vdc battery, depending upon application
Transmits up to one mile with omni-directional antenna; up to 10 miles with higher gain directional antennas
Designed for use in Pak-Bus networks
Settings stored in non-volatile memory
Optional extended temperature testing

General Description

The RF401 Spread Spectrum Radio has a 910 to 918 MHz operating frequency range, which is allocated to the US and Canada. Spread spectrum radios spread the normally narrowband information signal over a relatively wide band of frequencies. This improves communication performance in locations where RF noise, pagers, cellular phones and multipath could cause interfence. The RF401 reduces susceptibility to RF interference from similar spread spectrum devices by providing user-selectable frequency hopping patterns.

The RF401 spread spectrum radio modem supports point-to-point and point-to-multipoint datalogger communications. It can serve as a field modem/radio while connected to the datalogger or as a base station modem/radio when connected to a computer. The RF401 modem can also be used for general purpose wireless data communications.

Questions? Please refer to the email address in this graphic if the adjacent link does not work.