Product Information - L17565

CR1000 Stack Mounting Kit

General Description

1. If the datalogger will be housed in an ENC 10/12 enclosure and you desire to have the datalogger attached to the backplate in a "horizontal" orientation (i.e., the long axis of the datalogger spanning the short axis of the ENC 10/12 enclosure; the datalogger will fit "vertically" without a stack bracket),or
2. If you desire to place a small peripheral under the mounting bracket and secure it with Velcro®, thus conserving space, or
3. If you desire to have the wiring panel terminals at about the same height from the enclosure backplate as the terminals in one of our power supplies. However, this may make sensor wiring more difficult if you have sensors or peripherals with "stiff" cable jackets.