Product Information - CR510 (Discontinued)
Print this page

Measurement Module with 128K RAM Memory

Accessories for the CR510 are still available. Click here to view.
Click picture for full size image.
Model Memory Data Values Stored Temperature Range
CR510 128K 62,280 -25° to +50°C
CR510 -55 128K 62,280 -55° to +50°C
CR510-2M 2M 1,000,000 -25° to +50°C
CR510-2M -55 2M 1,000,000 -55° to +50°C

Brochure, Version Date: March, 2004  Brochure
Specifications, Version Date: March, 2004  Specifications
Datalogger Comparison Table, Version Date: September, 2006  Datalogger Comparison Table

Please contact Campbell Scientific for a full manual.

Download Latest Operating System

Features

  • Ideal where only a few sensors will be measured
  • Stores 62280 data points (non-volatile)
  • Memory upgrade available for storing up to 1 million data points (non-volatile)
  • 16K program storage (non-volatile)
  • 16K for auxillary program storage (non-volatile)
  • Data format options are mixed array (default) or table
  • Available operating systems: Mixed Array, Table, PakBus, Modbus, ALERT
  • Software support offered in LoggerNet or PC208W (full-featured) or ShortCut (programming)
  • Detachable keyboard/display, the CR10KD, can be carried to multiple stations

General Description

The CR510 dataloggers are a smaller version of our popular CR10X dataloggers. They provide a lower-cost datalogger alternative for measurements of a limited number of sensors, yet can be used with most of our telecommunication devices such as cellular telephones, RF UHF/VHF RF modems, and satellite transceivers. The CR510-series dataloggers use external power supplies and keyboard displays. They are not compatible with multiplexers, SDM devices, or thermocouples.

Specifications

  • Analog inputs: 4 single-ended or 2 differential, individually configured
  • Pulse counters: 2
  • Switched volt. excitations: 2
  • Control/digital ports: 1
  • Scan rate: 64 Hz
  • Analog volt. resolution: to 0.33 uV
  • A/D bits: 13

Physical Description

The CR510 was designed to provide a rugged datalogger with a low per unit cost. Some of its distinguishing physical features are:
  • The CR510 does not have an integral keyboard/display. The user accesses the CR510 with the portable CR10KD Keyboard Display or with a computer or terminal.
  • The power supply is external to the CR510. This gives the user a wide range of options for powering the CR510.

CR510 Operating Systems

The CR510 is shipped with the Array-Based operating system unless another is specified. Operating systems can be upgraded as new instructions become available, or changed to meet customer needs. Available operating systems are:
  • Mixed Array Operating System (default). Contains 31 measurement instructions, 46 processing/math instructions, and 21 program control instructions. For a complete list of instructions included in the Array-Based OS, see the Operator's manual.
  • Table Data Operating System (OS510TD/U). Allows the CR510 to store the final storage data in the form of a table.
  • PakBus Table Data Operating System (OS510PB/U). Allows the CR510 to communicate with CR200-series dataloggers in the same network. Final storage data is stored in table format.
  • Modbus Array-Based Operating System (OS510MB/U). Supports the Modbus protocol which allows the CR510 to interface with SCADA and MMI software packages.
  • ALERT Operating System (OS510AL/U). Allows the CR10X to store and transmit data in the ALERT format (flood warning system).
Download Adobe Acrobat Reader



Home | What's New | Products | Services | Applications | Courses & Shows | Museum | Literature | Privacy | About Us
Contact Us | Recruitment | Search | Links | Conversions | Download | Site Map

Questions? Please refer to the email address in this graphic if the adjacent link does not work.   Phone: (780) 454 2505
© 2001 Campbell Scientific (Canada) Corp.  
Top of Page