CSC Product Information

Product Information - 43502

RM Young Compact Aspirated Shield

Brochure

General Description

The 43502 Aspirated Radiation Shield can be used with a variety of temperature and relative humidity sensors up to 0.9 inches in diameter. The 43502 employs concentric downward facing intake tubes and a small canopy shade to isolate the temperature probe from direct and indirect radiation. The blower operates off a 115 Vac to 12 Vdc transformer that is included with the shield.

Mounting

The 43502 mounting bracket has a U-bolt configured for attaching the shield to a tripod mast, tower leg, or vertical pipe with up to 2" OD. By moving the U-bolt to the other set of holes, the bracket can be attached to a CM202 , CM204 , or CM206 crossarm. Each of these crossarms includes the CM210 Mounting Kit for attaching the crossarm to a tripod mast or tower leg. For our towers (e.g. UT20, UT30 ), an additional CM210 Crossarm Mounting Kit can be ordered for attaching the crossarm to two tower legs for additional stability.

The 43502 houses the HC-S3/XT series sensors with the addition of an R41049 Adaptor Plug. The R41046DS-24A Adaptor Plug adapts the 43502 for the HMP45C series sensors.

Questions? Please refer to the email address in this graphic if the adjacent link does not work.