Product Information - SDM-CAN
Print this page

Datalogger to CANbus Interface
Click picture for full size image.
Brochure, Version Date: June, 2006  Brochure
Manual, Version Date: November, 2001  Manual

Features

  • Supports CAN 2.0A and 2.0B active and passive modes
  • Supports up to 1 Mbaud data rate
  • Uses latest Philips SJA1000 CAN controller clocked at 16 MHz
  • The CANbus protocol is used in a number of networking applications including vehicle testing applications (VDAS)
  • Allows up to 16 SDM-CAN units to be addressed and simultaneously connected to a datalogger

General Description

The SDM-CAN interface allows a Campbell Scientific datalogger to sample data directly from a CANbus communications network. CANbus data can be stored (and synchronized) with other data values measured directly by the datalogger, allowing testing and verification of CANbus-based data alongside measurements made independently via the datalogger's input channels. The SDM-CAN also supports transmission of data onto a CANbus network.

Download Adobe Acrobat Reader



Home | What's New | Products | Services | Applications | Courses & Shows | Museum | Literature | Privacy | About Us
Contact Us | Recruitment | Search | Links | Conversions | Download | Site Map

Questions? Please refer to the email address in this graphic if the adjacent link does not work.   Phone: (780) 454 2505
© 2001 Campbell Scientific Ltd., Campbell Scientific (Canada) Corp.