Product Information - CM106K |
 |
CM106 Tripod Kit
Brochure
|
|
Manual
|
General Description
The CM106K Tripod Kit contains the hardware necessary to construct a 3 m (10 ft) tripod. It is designed to save shipping cost by having the customer obtain steel pipe and a grounding rod locally. The kit contains the parts to assemble the pipes into a tripod, including feet, joints, bolts and nuts, lightning rod, and other parts. The customer obtains lengths of steel pipe and a copper ground rod from a local supply house. The CM106K is primarily intended for overseas shipments.CM106K Specifications
- Measurement Height: 3.0 m (10 ft)
- Vertical Load Limit: 45 kg (100 lb)
- Mast Outer Diameter: 48 mm (1.90 in.)
- Base Diameter: 3.4 m (11 ft)
- Leveling Adjustment: Clamp brackets on each leg, adjust individually
- Leg Base: 150 x 89 mm with one 21 mm hole for stakes (6 in. by 3.5 in. with one 0.84 in. hole for stakes)
- Maximum Slope Anglea: 22° or 40% grade
- Portability: Collapsible to 23 cm (9 in.) diameter by 100 in. (2.54 m) length
- Weight with Mast: 30 kg (67 lb)
- Sustained Wind
Unguyed: 80 mph (36 m/s)
Guyed: 115 mph (51 m/s) - Wind Gust
Unguyed: 104 mph (46 m/s)
Guyed: 150 mph (67 m/s)
Maximum Allowable Windb
a - Maximum slope angle assumes that one leg points downhill while the other two legs point uphill.
b - Allowable wind values assume (1) mast and leg components are made of steel (minimum yield strength of 36 ksi [248 MPa]) and fabricated according to the specified design; (2) 14 x 16 in. enclosure at mast base; (3) 10.5 x 16.5 in. solar panel at mast base; (4) crossarm and sensors (1.4 ft2 projected area) at mast top; and (5) adequate ground anchors (stakes can pull out at lower wind speeds).
Contact Us | Recruitment | Search | Links | Conversions | Download | Site Map
Questions?
Phone: (780) 454 2505© 2011 Campbell Scientific (Canada) Corp.